IFOOTAGE is redefining design for camera equipment. Our customers include professional filmmakers, nature and landscape photographers, documentary filmmakers, wedding and event photographers, studio photographers, a wide range of video content providers, and amateur video and photography enthusiasts.
IFOOTAGE Shark Slider S1 with Extension Tubes (S1B)
IFOOTAGE Shark Slider is an essential tool for achieving precise and controlled camera movement. It is a reliable, steady, and extremely lightweight solution for videographers. Take this slider everywhere and effortlessly set it up in minutes. It can be used in different types of shooting applications and locations, and provides perfect results to ensure precision and versatility in each situation.
Material: Carbon fiber, Anodized aluminium SUS304
Weight: 8.4lbs(with pulley)
Tube diameter: 0.87inch
With extension tube:
Max length: 53inch
Effective length: 47inch
Max load: 11lbs
Without extension tube:
Max length: 31inch
Effective length: 25inch
Max load: 15.5lbs
| || || |
Silent, Durable Bearings
Six long-wearing bearings provide a longer life (about 5 times longer than other brands). This device will operate smoothly and quietly for a lifetime.
High Torque Belt
Synchronous belts provide high precision and high torque; synchronous wheel clearance is nearly zero; and torque is much higher than ordinary XL belts.
Improved Carbon Fiber Tube
Made of top of the line carbon fiber material; knitting technology of 14 layer 100% (thickness is 2.5 times the ordinary carbon fiber tube). This construction ensures durability, which, along with stainless steel joints, and a carbon tube concentricity within 0.01mm, ensure this is one of the smoothest sliders on the market.
| || || |
Foot rests are designed for use on uneven ground. To use, simply loosen the lock on the side to release the foot reset. Rotate it to adjust the angle of the slider, and further adjust the height by twisting the rubber tip and locking securely.
The Perfect extension
Both sides are equipped with 1/4" and 3/8" screw mounts. This slider can be connected to a video monitor or other external devices, which greatly improve the flexibility of this device.
Correct Rail Pulley Tension
After a long periods of use, without dissembly, the slider rails may loosen due to temperature differences and external impact. This can be easily fixed by adjusting the rail clamps underneath the main body. Unlock the clamp buttons and adjust for a snug fit.
|IFOOTAGE Shark Slider S1 with Extension Tubes (S1B)||IFOOTAGE Shark Slider S1 without Extension Tubes (S1S)||IFOOTAGE CB2500 Extension Tube||IFOOTAGE CB3630 Extension Tube|
|Suitable||DSLR cameras, Video camcorders, Film photography, etc...||DSLR cameras, Video camcorders, Film photography, etc...||IFOOTAGE Shark Slider S1||IFOOTAGE Shark Slider S1|
|Material||Carbon fiber + Anodized Aluminum + SUS304||Carbon fiber + Anodized Aluminum + SUS304||Carbon fiber||Carbon fiber|
|Weight||8.4 lbs||7.5 lbs||1.48 lbs||1.54 lbs|
|Tube Diameter||0.87 inch||0.87 inch||0.87 inch||0.87 inch|
|Max length||53 inch||31 inch||22 inch||22 inch|
|Effective length||47 inch||25 inch||none||none|
|Max load||15.5 lbs without extension tube/ 11 lbs with extension tube||15.5 lbs||none||none|
|Extension drive belt length||98.4 inch||none||98.4 inch||143 inch|